TikTok/@skill.rumahan
Brilio.net - Almost everyone does cooking. Regardless of male or female. The more often you cook, the LPG gas cylinder will automatically run out quickly and will have to be replaced with a new one. Many people avoid the process of installing new LPG gas because they are afraid of leaks.
It is difficult to detect leaks in every gas cylinder circulating on the market . This condition is not only caused by damage to the gas cylinder, but also due to loose rubber seal covers or other things. Usually, signs of a leaking LPG gas cylinder can be seen from the hissing sound or smell of sulfur coming from the tube hole.
To overcome the LPG gas leak, many people choose to add a plug to the gas cylinder hole using a rubber band or sewing thread. However, netizens on the TikTok account @skill.rumahan have another trick that is no less simple.
Tricks to deal with leaking LPG gas using 1 simple tool.
So, instead of adding rubber bands or sewing thread, this man only needed one simple tool, namely an additional rubber seal that was not included with the gas cylinder.
To do this, cut the rubber seal so that it is split into two parts, then just take one part. Then, set aside the rubber seal piece first. After that, remove the rubber seal from the new gas cylinder. Then insert the piece of rubber seal that was previously prepared into the gas cylinder hole.
Then reinsert the rubber seal that came with the gas cylinder. Press gently until all the rubber seals fit perfectly into the LPG gas cylinder hole.
"Put in the rubber and wait until you don't hear a hiss and don't smell," stressed the owner of the TikTok account @skill.rumahan, quoted by BrilioFood on Tuesday (19/3).
photo: TikTok/@skill.rumahan
If you can confirm that the LPG gas is no longer leaking, you can immediately install the regulator on the LPG gas cylinder. Make sure the regulator position is really tight. Next, the stove is ready to be used again for cooking.
photo: TikTok/@skill.rumahan
So, this trick for dealing with leaking LPG gas using 1 simple ingredient is easy to copy, right? Taking a peek at the TikTok @skill.rumahan upload which has been watched 99 thousand times, quite a few netizens have left enthusiastic comments about this trick, you know.
@skill.rumahan the right solution for gas so it doesn't leak #useful knowledge #ideakreatif #tips #cara #solution DJ Babibum
How to save on LPG gas usage.
Many people complain when LPG gas runs out quickly. This is indeed difficult to avoid, especially among mothers who cook regularly every day. Well, below there are several ways to save LPG gas that you can try at home.
1. Use the right pan.
Use a pan that matches the size of your stove. A pan that is smaller than the stove will waste energy, while a pan that is too large can slow down the cooking process.
2. Cover the pan while cooking.
When cooking, always cover the pan with a lid. This will help retain the heat in the pan and speed up the cooking process, reducing the time and energy required.
3. Use appropriate fire.
Adjust the stove fire according to cooking needs. Use a fairly high heat to start heating, but reduce it to a lower level once it reaches the required temperature.
4. Check for leaks.
Regularly check LPG gas cylinders and hoses to ensure there are no leaks. Gas leaks can cause energy waste and also endanger safety.
5. Turn off the stove according to the time.
Turn off the stove a few moments before finishing cooking. The remaining heat in the pan is still enough to complete the cooking process without wasting gas.
6. Use energy-saving technology.
There are several technological innovations, such as gas regulators that can regulate gas flow automatically based on cooking needs, which can help save on gas usage.
(brl/lut)