Brilio.net - A gas stove burner is a round plate that functions to emit fire when the stove is turned on. This tool allows gas and oxygen to meet so that fire can appear. The small cavities in the burner play a role in delivering heat evenly to the bottom of the pan when cooking.
Usually, gas stove burners are made of brass material which is known as a good heat conductor. In addition to having optimal heat conductivity, brass is also strong and durable even though it is exposed to high temperatures every day.
Over time, the burner can turn black. If not cleaned regularly, the holes in the burner are at risk of being clogged with rust. This condition can cause the fire to not burn perfectly and the color changes from blue to red.
A YouTube user named Darmawan once shared how to clean a stove burner so that it continues to function properly for a long time. This cleaning method is recommended to be done every two to three months so that the stove remains durable and can be used for years.
"So if we are diligent (in cleaning the stove burner) once every 2 or 3 months, it can last 10 to 15 years," he explained, quoted by brilio.net from YouTube Darmawan Geranting on Tuesday (4/3).
First remove the burner from the stove, make sure it is detached from the gas line to keep it safe. Then put the burner in a container. Soak it using bathroom cleaning fluid for about three to five minutes.
Well, this bathroom cleaning fluid is one of the ingredients to help dissolve burnt stains and rust that stick firmly to the stove burner. While waiting, you can prepare gloves so that your hands don't get irritated easily when cleaning the burner later.
photo: YouTube/Darmawan Geranting
After that, add one more cleaning agent, which is dish soap. Drop a little dish soap onto the burner. This dish soap is used to produce foam while the stove burner is being cleaned. The foam from this dish soap helps the cleaning process to be more effective, you know.
Scrub the burner using a dishwashing sponge or a clothes brush. The longer the scrubbing process is carried out, the more rust and black stains on the burner will disappear. If it feels clean enough, the burner can be rinsed using clean water.
photo: YouTube/Darmawan Geranting
According to Darmawan, his burner was not really shiny. It could be because he didn't brush it long enough. But compared to the previous burner, after cleaning it became much shinier and there was no clogged rust. If you want to try the method of cleaning the stove burner as practiced by Darmawan, here it is?
A simple way to replace the burner yourself without the hassle of going to a repairman.1. Prepare tools and materials.
- Replacement burner that matches the stove type
- Screwdriver or wrench (if needed)
- Clean cloth
- Small brush or needle to clean any remaining dirt.
2. Turn off the gas supply.
Before replacing the burner, be sure to turn off the gas flow by closing the gas cylinder regulator. This is to prevent leaks or sparks during the replacement process.
3. Remove the old burner.
Carefully lift the old burner off the stove. If the burner is stuck due to dirt or rust, gently wiggle it until it comes loose. On some stoves, the burner may be held in place by screws, so use a screwdriver to remove them.
4. Clean the burner mounting area.
Use a small brush or needle to clean any remaining dirt that may be clogging the gas holes. Wipe around the burners to keep the stove clean and the fire burning perfectly.
5. Install the new burner.
Place the replacement burner in the correct position. Make sure the holes are aligned with the gas flow to ensure optimal flame. If the burner uses screws, tighten them again with a screwdriver.
6. Test the stove.
Turn on the stove to make sure the burner is working properly. Check the color of the flame, it should be blue and even. If the flame is red or does not burn properly, make sure the burner is installed properly and there is no blockage.
If problems persist after installation, recheck the gas connection or seek the assistance of a technician to ensure the stove is functioning safely.
(brl/lut)
