foto: Instagram/@mamiemanda
Brilio.net - Every house must have at least one kitchen cloth. Not without reason, kitchen cloths are usually used to wipe dirt on the surface of the kitchen table. Not only that, some people even use kitchen cloths to wipe the surface of the stove.
Because of this, the cloth ends up dirty with various stains and dirt. Apart from looking dirty, sometimes kitchen towels smell bad. If this is the case, a number of people use various methods to clean their kitchen towels .
The method that is often done is to scrub it with various cleaning agents. To get maximum cleanliness, kitchen towels must be scrubbed for a long time. Even though it is clean, this method requires extra energy.
However, it turns out, there is a more practical way to clean dirty and smelly kitchen towels. This method was demonstrated by Instagram user @mamiemanda. Through his upload, he showed the condition of his kitchen towel which was dirty and had several black stains.
photo: Instagram/@mamiemanda
Seeing the poor condition of his kitchen, he immediately washed the kitchen cloth using a simple method, but with maximum results. Reported by BrilioFood from the Instagram account/@mamiemanda on Monday (1/3), the first step is to pour enough water into a bowl. Then, put a kitchen towel and one kitchen ingredient , namely dishwashing soap, into it.
photo: Instagram/@mamiemanda
Not only that, he also added 1 tablespoon of citrus as a cleaning mixture. Stir so that all the cleaning ingredients are mixed completely. After that, let it sit and soak the kitchen towel for 2-3 hours. This process aims to remove all stubborn stains completely.
photo: Instagram/@mamiemanda
After soaking for 2-3 hours, drain the kitchen towel. I just checked for a moment then rinsed the kitchen cloth with running water. Even without rubbing, the stains on the kitchen cloth seem to fade by themselves. So it's clean again, right? If you do this, the smell on the kitchen towel will also disappear and nothing will remain.
photo: Instagram/@mamiemanda
View this post on Instagram
How to mop the floor so that the results are clean and shiny.
Here are some steps to achieve clean and shiny results when mopping the floor:
1. Prepare the right equipment.
Make sure you have everything you need, including a bucket or large bowl, a broom or vacuum, a floor broom or dust filter, a floor mop, and a dry cloth or floor dryer (if you have one).
2. Sweep or vacuum the floor.
Start by cleaning the floor of dust, dirt, and other debris. Use a broom or floor vacuum to thoroughly clean the floor.
3. Preparation of cleaning solution.
Add a floor cleaner suitable for your floor type into a bucket or large bowl. Be sure to follow the instructions for use on the cleaning product label.
4. Mop the floor properly.
Dip the floor mop in the cleaning solution, making sure it is not too wet or too dry. Start at the corner of the room and move the mop in a back-and-forth motion, making sure to sweep all areas in a uniform motion.
5. Clean the mop when necessary.
If the mop becomes dirty or too wet, rinse and wring it out before continuing. Use clean water to rinse and make sure there are no cleaner residues left on the floor.
By following the steps above carefully and regularly, you can achieve clean and shiny floors every time you carry out the cleaning process.
(brl/mal)
