foto: TikTok/@nniirrmmaallaa_

The stove came back squeaky clean, making me enthusiastic about cooking.

  13 April 2024 12:30

Brilio.net - The stove will quickly get dirty if it is frequently used for cooking. Moreover, the part of the stove that is closest to the pot or pan. Oil splashes or cooking spills may fall onto the surface of the stove.

If left like that, these stains will harden, making it even more difficult to clean. This makes the appearance of the stove look dirty and oily when touched.

Knowing this, a number of people immediately scrubbed the entire surface of the stove using a citrus solution. This cleaning agent is really effective in removing all the burnt crust on the stove burner. After scrubbing, the stove burner just needs to be rinsed using running water.

But don't just use citrus, it turns out there are other cleaning agents that can be effective in getting rid of burnt crust on stove burners. The method was shown to TikTok user @nniirrmmaallaa_. Even without rubbing it with citrus, the appearance of the stove will be as clean as possible, you know.

"Auto glowing powder stove," he wrote in the video caption.

How to clean burnt stove burnt crust.

At the beginning of the video, he shows the appearance of his stove stove. It is clear that burnt crust has accumulated on the entire surface of the stove burner.

burnt crust stove stove stock  2024 brilio.net

photo: TikTok/@nniirrmmaallaa_

To clean it, he immediately placed the stove burner on a cardboard sheet. After that, sprinkle three kitchen ingredients onto the surface of the stove burner. Reported by BrilioFood from TikTok @nniirrmmaallaa_, the kitchen ingredients used are baking soda, dish soap and table vinegar.

burnt crust stove stove stock  2024 brilio.net

photo: TikTok/@nniirrmmaallaa_

Once the three cleaning agents have been sprinkled, let the stove burner sit for a few moments. The goal is so that the cleaning solution can work optimally to remove burnt crust.

"Leave it for approximately 2 hours, OK," said the video owner.

burnt crust stove stove stock  2024 brilio.net

photo: TikTok/@nniirrmmaallaa_

After leaving it for 2 hours, immediately scrub the entire surface of the stove with ordinary dish soap. Because it has been left in the cleaning solution, the burnt crust immediately falls off when rubbed.

burnt crust stove stove stock  2024 brilio.net

photo: TikTok/@nniirrmmaallaa_

Finally, rinse the stove burner under running water. While rubbing gently to ensure there is no burnt crust or cleaning solution remaining. As a result, the stove looks clean and shiny again, right?

burnt crust stove stove stock  2024 brilio.net

photo: TikTok/@nniirrmmaallaa_

@nniirrmmaallaa_ Buluk Auto Glowing Stove Only uses 3 ingredients #stove #fyp #fypdongggggggg #purfurniture #pink #home #kitchenesthetic original voice - Nniirrmmaallaa

Easy tricks to overcome a clogged stove burner.

Here are some easy tricks to deal with a clogged stove burner:

1. Clean the burner hole.

Turn off the gas and let the stove burner cool completely. Then use an old toothbrush or other small brush to clean the burner holes. You can use warm water or a mild cleaning fluid to help loosen stuck dirt.

2. Use a needle.

If the burner hole is very clogged, you can use a needle or other small, sharp object to remove any debris blocking the gas flow. Make sure to be careful not to damage the burner holes.

3. Use special cleaners.

There are several special cleaning products designed to clean stove burners. You can look for a cleaner that suits your stove type at a household goods store.

4. Soak in cleaning solution.

If parts of the stove are removable, such as burner caps or covers, you can soak them in a cleaning solution for several hours to loosen stubborn dirt.

5. Check the gas hose.

Sometimes blockages can occur in the gas hose. Make sure to check the gas hose periodically and clean it if necessary.

Make sure to always be careful when cleaning the stove burner, especially if you use cleaning chemicals or sharp tools. Be sure to turn off the gas supply and allow the furnace to cool completely before starting cleaning.

(brl/tin)

RELATED ARTICLES

TOP