5 Ways to deal with a hissing smelly LPG gas stove safely and effectively

foto: shutterstock.com

Solve the problem of hissing and smelly LPG gas stoves with 5 practical and safe steps. Prevent the risk of gas leaks in your home kitchen.

Brilio.net - LPG gas stoves have become the main cooking equipment in almost every household. Its practical and efficient use makes cooking activities easier. Compared to kerosene or firewood stoves, LPG gas stoves offer various advantages such as stable flames, easily adjustable heat, and of course more environmentally friendly.

Like other household appliances, LPG gas stoves also have some obstacles in their use. Common problems include unstable flames, difficulty in lighting, or the most worrying is a gas stove that hisses with a pungent gas odor.

The condition of the LPG gas stove hissing and smelling of gas should not be ignored because it can endanger safety. The smell of gas that is smelled usually indicates a leak in the gas line system. Leaking LPG gas can accumulate in a closed room and has the potential to cause a fire or explosion if exposed to sparks.

This problem generally occurs due to several factors, such as leaks in worn or damaged gas hoses, improperly installed regulators, damaged or corroded stove components, loose connections at various points, and substandard installation or maintenance.

When faced with a hissing and smelly gas stove, there are several things to avoid such as turning on or off electricity around the area, using a mobile phone near the stove, lighting a match or lighter, and panicking which will only make the situation worse.

Before trying how to overcome the smelly hissing LPG gas stove, the first step to take is to turn off the stove and close the gas valve. Then, open the windows and doors for better air ventilation. After the situation is safer, then you can do the inspection and repair with the following methods reviewed by BrilioFood , Tuesday (12/31).

The most common way to deal with a hissing smell on an LPG gas stove is to check the regulator connection.

Steps:
- Turn off the stove and close the gas valve.
- Remove the regulator from the gas cylinder
- Check the rubber seal on the regulator
- Reinstall the regulator properly until you hear a 'click' sound.
- Turn the locking lever to the lock position.

This process takes about 5-10 minutes. The success rate is quite high if the problem is indeed from a loose regulator connection. This method is safe to do yourself by still paying attention to caution.

Damaged or old gas hoses are often the cause of leaks.

Steps:
- Turn off all gas appliances
- Check the gas hose from end to end.
- Look for cracks, tears, or blisters.
- Replace the hose if damage is found.
- Make sure the hose clamp is securely attached.

The inspection takes 10-15 minutes, while the hose replacement can take 20-30 minutes. This method is very effective in dealing with leaks in the hose. It is better to use a gas hose that meets SNI standards for optimal safety.

photo: shutterstock.com

Dirt and food debris can interfere with gas flow and cause leaks.

Steps:
- Remove the stove burner
- Clean the gas holes with a soft brush.
- Use soapy water to clean the components.
- Dry thoroughly
- Reinstall properly

The cleaning process takes 30-45 minutes. The effectiveness of this method is seen from the more stable flame and the absence of hissing sounds. Regular cleaning can prevent the problem from recurring.

A damaged or clogged gas valve can cause leaks.

Steps:
- Turn off and disconnect all gas connections
- Check the gas valve for damage.
- Clean the valve from dirt
- Replace the valve if damage is found.
- Reinstall carefully

Time required is 15-20 minutes for inspection and cleaning, longer if replacement is required. Success rate is high if done correctly. It is best to seek the assistance of a technician for valve replacement.

This method helps to find leak points that are difficult to detect.

Steps:
- Make a soapy water solution
- Apply to gas connections
- Watch for bubbles to appear
- Mark the bubbly area
- Repair the leaking part

The testing process takes 10-15 minutes. This method is very effective for detecting small leaks. Use soap that does not contain corrosive ingredients to avoid damaging components.

Safety in using LPG gas stoves should be a top priority. In addition to making repairs when problems occur, routine maintenance is also very important. Check the condition of the stove, hose, and regulator regularly, at least once every 3-6 months. Make sure all components are in good condition and functioning properly.

If trying the above method to overcome the hissing smelly LPG gas stove problem still persists, immediately contact a professional technician. The cost of technician services is much smaller than the risks that may occur if repairs are carried out incorrectly. With good care and proper handling, LPG gas stoves will be durable and safe to use for a long time.

(brl/tin)