foto ilustrasi: griyasatriaresidence.wordpress.com
Brilio.net - A clean and well-maintained floor gives the impression of a comfortable and hygienic home. However, various types of stains often stick to the floor surface, ranging from spilled drinks, food residue, to rust stains that are quite difficult to remove. Rust stains usually appear from direct contact with metal objects such as LPG gas cylinder legs, rusty furniture, or iron household appliances.
Cleaning rust stains does not always require expensive special chemicals. How to clean rust stains on floors using kitchen ingredients is just as effective and safer for health. Here are various methods that can be tried as summarized by BrilioFood , Thursday (12/26).
1. How to clean rust stains on the floor using vinegar and salt.
photo: Pixabay/StockSnap
The combination of vinegar and salt is very effective in removing rust stains on floors.
Materials needed:
- White vinegar
- Table salt
- Warm water
- Clean cloth
- Soft brush
- Small container
Steps:
1. Mix white vinegar and salt in a 2:1 ratio
2. Stir until the salt is slightly dissolved.
3. Apply the mixture to the stained area.
4. Let stand for 30 minutes
5. Rub gently with a soft brush
6. Wipe with a damp cloth
7. Repeat if necessary
8. Dry the area with a clean cloth.
The citric acid in lemons is effective in breaking down rust stains.
Materials needed:
- 2-3 fresh lemons
- Table salt
- Warm water
- Duster
- Soft nylon brush
Steps:
1. Cut the lemon into two parts
2. Sprinkle the stained area with salt.
3. Squeeze the lemon over the salt.
4. Leave it for 1-2 hours
5. Rub the area with a slice of lemon.
6. Clean with a soft brush
7. Rinse with warm water
8. Dry thoroughly
photo: shutterstock.com
Baking soda is a versatile kitchen ingredient that is effective at removing stains.
Materials needed:
- Baking soda
- Warm water
- Microfiber cloth
- Soft brush
- Wipe dry
Steps:
1. Make a paste of baking soda and water.
2. Apply the paste to the rust stains.
3. Leave it for at least 2 hours
4. Rub gently with a brush
5. Wipe with a damp cloth
6. Dry the area
Limes contain acid which can remove rust.
Materials needed:
- 4-5 limes
- Table salt
- Warm water
- Clean cloth
- Soft brush
Steps:
1. Squeeze the lime into a container
2. Add a little salt
3. Apply the mixture to the stain.
4. Let stand for 45 minutes
5. Scrub with a brush
6. Rinse with warm water
7. Dry the area
The combination of flour and vinegar forms a paste that is effective in removing rust.
Materials needed:
- Flour
- White vinegar
- Warm water
- Duster
- Soft brush
Steps:
1. Mix flour and vinegar until it forms a paste
2. Apply to stained area
3. Wait until it dries
4. Scrub with a soft brush
5. Rinse with warm water
6. Dry thoroughly
Each method has its own advantages, depending on the severity of the stain and the type of floor. The most important thing is consistency in cleaning and maintaining the floor to prevent new rust stains from appearing.
In the cleaning process, preparation is also needed to be safe, for example, always test a small area first, make sure the room is well ventilated when cleaning, use gloves to protect your hands, do not mix various cleaning agents, and immediately rinse the cleaned area. Remember to always prioritize safety and follow the cleaning instructions according to the type of floor.
In addition to implementing the methods for cleaning rust stains on floors as above, you also need to pay attention to how to prevent it and maintain the floor so that it is clean and stain-free.
- Install protective rubber on the legs of metal furniture.
- Check the condition of the gas cylinder legs regularly
- Wipe immediately if there are water drops around metal objects.
- Provide a protective layer in rust-prone areas.
- Clean the floor regularly
(brl/tin)
