Brilio.net - Rubber on motorbike handlebars will provide comfort when riding. When you hold the handlebar, your hands won't feel rough. This rubber, which is usually located at the end of the handlebar or handlebar grip, functions as a vibration absorber when the motorbike is running. Apart from that, the rubber handlebars also help reduce soreness in the hands when riding long distances.
Well, because its position is constantly exposed to weather and friction, the rubber on motorbike handlebars requires good care to remain optimal. Good rubber condition is also very important to maintain driving safety. Because worn or damaged rubber can cause the grip to be unstable and difficult to control. Therefore, special care is needed to keep the motorbike handlebars working optimally.
One way to care for motorbike handlebars is to regularly clean the rubber parts. Because it is often exposed to dust, exposure to sunlight, and various kinds of stains from the hands, motorbike handlebar rubber becomes easily bristled. Various types of crust will make the appearance of the motorbike handlebars look dull and even make the color fade.
If the condition of the motorbike handlebar rubber is dirty and rotten, some people will usually replace it with a new one. But instead of spending a lot of money at a repair shop, you can actually clean the crust that causes dullness on your motorbike handlebar rubber, you know. A YouTube user, my assistant, once shared a trick for cleaning motorbike handlebar rubber with kitchen ingredients.
How to clean rough and crusty motorbike handlebar rubber so it shines again.
Reported by BrilioFood from YouTube my assistant on Wednesday (8/5), the kitchen ingredient used was dish washing soap. Well, this dishwashing soap is considered very effective in removing stubborn stains such as crust on motorbike handlebars .
photo: YouTube/my assistant
How to use it is quite easy. First of all, rinse the handlebar with clean water first. After that, apply dish soap to the entire rubber surface of the motorbike handlebars. Make sure the motorbike handlebars are evenly smeared with washing soap.
If so, immediately scrub this part of the handlebar with an old toothbrush. Or if the stain is very stubborn, you can use a clothes brush. Continue rubbing evenly, including in the narrow crevices. That way, all the stains will fade optimally.
photo: YouTube/my assistant
So, while scrubbing, you can add more dish soap to the crusty parts of the handlebar. Then continue brushing until the stain disappears. If so, rinse it while rubbing it with your hands so that the soap is removed and the handlebars are clean.
photo: YouTube/my assistant
The final step, don't forget to dry the motorbike handlebars before use. This way, the motorbike handlebars will be cleaner and the appearance will shine like new. You can use or ride a motorbike more comfortably because there are no annoying stains on the handlebar rubber.
Having been watched more than 25 thousand times, this video about how to clean motorbike handlebar rubber immediately caught the attention of netizens. Some of them even provided responses in the comments column. Most of these netizens admitted that they were amazed by the results of the handlebars which looked like new.
Tips for repairing a rocking motorbike handlebar.
Repairing a wobbly motorbike handlebar is an important step to maintain driving safety. Here are nine tips for fixing a wobbly motorbike handlebar.
1. Check the handlebar support.
Make sure the handlebar support or handlebar mount is in good condition and is not loose or damaged.
2. Check the handlebar bearings.
Check the condition of the handlebar bearings, make sure there is no damage or wear that could cause the handlebar to shake.
3. Check connectors and bolts.
Check all connectors and bolts that connect the handlebar to the motorbike, make sure all bolts are installed correctly and are not loose.
4. Check the shock absorber.
Make sure the shock absorber is in good condition, because a damaged shock absorber can cause the handlebar to shake.
5. Check the steering head bearing.
Check the condition of the bearings on the steering head, make sure there is no damage or wear that could cause the handlebar to shake.
6. Check the swing arm.
Check the condition of the swing arm, make sure there is no damage or wear that could cause the handlebar to shake.
7. Check tires and suspension.
Check the condition of the tires and suspension, as worn tires or poor suspension can cause the handlebar to shake.
8. Check the fork.
Check the condition of the fork, make sure there is no damage or wear that could cause the handlebar to shake.
9. Perform reset.
If after checking all the components above the handlebar is still wobbling, readjust the steering and suspension system of the motorbike to balance the handlebar.