Brilio.net - Various wooden home equipment such as frames and doors must be cared for properly. This is because dust, dirt and stains can accumulate on the surface of the frame and door. As a result, the appearance will be dirty and blackish in color.
Not only that, sometimes the surface of wooden frames and doors also grows mold. After investigating, mold is caused by humidity and poor air circulation . Over time, this will damage the wooden frames and doors.
A number of people immediately scrubbed wooden frames and doors using a mixture of water and vinegar. Reporting from thespruce.com, vinegar can be used to remove mold and dust from wooden furniture.
But instead of using vinegar, you can replace it with other cleaning agents. The same thing was done by YouTube user Basar Kerta. At the beginning of the video, he shows the appearance of the frame and door which are dirty and dirty.
How to clean dirty, dirty wooden frames and doors using only 1 kitchen ingredient.
"Here I will tell you how to clean dirty frames and doors with thick dust like this," he said, quoted by BrilioFood from Basar Kerta's YouTube on Saturday (4/5).
Both the window and door frames look very dirty.
photo: YouTube/Basar Kerta
To clean it, wipe the entire surface of the wooden frame and door with a feather duster. There appears to be less dust on the surface of wooden furniture.
"There's still something stuck because it's stubborn, that's why I cleaned it and then used this, guys," said the video owner.
photo: YouTube/Basar Kerta
He deliberately prepared a special cleaning fluid to clean the wooden frames and doors. It appears he mixed a kitchen ingredient, namely dishwashing soap, into the water. Stir then transfer the dish soap solution into a spray bottle.
"I just apply it straight away, I rub the dishwashing soap solution onto the frame and door like this," he explained.
photo: YouTube/Basar Kerta
After everything has been rubbed evenly, also spray glass cleaning fluid over the entire surface of the wooden frame and door. So the ingredients used to clean these two pieces of wooden furniture are dishwashing soap and wood cleaning fluid.
"You see guys, the maximum results are shiny again," he said.
photo: YouTube/Basar Kerta
Not just frames and doors, it turns out this cleaning solution can be used to clean glass windows, chairs and tables. The application method is the same, and the results do not disappoint.
How to repel plant pests using dish soap.
Using dish soap to repel plant pests is a fairly common solution, but remember that this is best done carefully because it can damage plants if not done properly. Here are the steps.
1. Make a soap solution.
Mix a few drops of mild dish soap (no fragrance or other additives) with warm water. Make sure there is not too much soap, because high concentrations can damage plants.
2. Spray on plants.
Pour the soap solution into a spray bottle and spray it on the infested plants. Make sure you spray the solution evenly on the top and bottom of the leaves and plant stems.
3. Repeat regularly.
Spray regularly, especially after rain or after watering plants. This helps maintain pest control effectiveness.
4. Monitor the plants.
Pay attention to the plant's reaction to this treatment. If you see signs of damage or negative reactions on the plant, stop using the soap solution and rinse the plant with clean water.
5. Use on certain pests.
This method is more effective for controlling pests such as aphids, thrips and other small insects. However, for larger pests or serious problems, you may need to consider other solutions.
Make sure to do a small test first on a small portion of the plant and observe the plant's reaction before applying it widely. If possible, it is always better to use pest control methods that are environmentally friendly and not harmful to plants.