Brilio.net - The cleanliness of the house must always be maintained so that the residents feel comfortable. Apart from sweeping, mopping the floor is one way to clean the house that must be done regularly. If the floor is clean, there will be no more dust and dirt in the house. That way, air circulation in the house will be smooth and clean.
Most people mop the floor using a cloth that easily absorbs water. However, because it is used continuously, it is not surprising that the mop used gets dirty quickly. Moreover, if you are lazy about washing it regularly, the appearance of the mop will become dirty and black. If that's the case, like it or not, the mop has to be washed thoroughly (deep cleaning).
Usually the mop is soaked in the cleaning solution for a while. The longer the soaking process, the more stubborn stains on the mop will disappear by themselves. For maximum results, the mop must also be scrubbed as vigorously as possible. Finally, just rinse the mop with clean water, then wring it out and dry it.
But there's no need to worry, it turns out there are other methods that can be used to wash mops. You don't even need to use extra energy to rub the mop, you know. The method was demonstrated by Instagram user @annepermata. At the beginning of the video, he shows the appearance of his mop which looks dirty after being used to wipe the entire surface of the floor.
photo: Instagram/@annepermata
How to wash dirty mops so they are clean and shiny.
To do this, put the mop that is already dirty into the bucket. Then, add three kitchen ingredients, namely salt, baking soda and dish soap as cleaning agents. As for the dosage, it can be adjusted to suit individual needs, OK?
photo: Instagram/@annepermata
Then add hot water until it soaks all parts of the mop. Stir then let sit and soak the mop for 1 hour.
photo: Instagram/@annepermata
After 1 hour, it appeared that the water soaking in the mop had changed color to become cloudy. Yes, all the stubborn stains on the mop dissolve in the soaking water. Without needing to check again, just squeeze it out and then rinse the mop under running water.
This method of washing mops can be recommended to be done regularly. Apart from making it look clean, the mop can also function optimally because it can remove all the stains on the floor.
"Deep cleaning can be done once a week so that the mop is free of dirt and oil," he said, quoted by BrilioFood from Instagram @annepermata on Thursday (14/3).
photo: Instagram/@annepermata
View this post on Instagram
How to mop the floor so that the results are clean and not sticky.
Here are some tips for cleaning floors without leaving a sticky residue:
1. Use the right cleanser.
Make sure you use a floor cleaner that is suitable for your floor type. For example, wood floors may require a special wood cleaner that doesn't leave a residue.
2. Dilute the cleaner with water.
If using a chemical-based floor cleaner, dilute it with water according to the instructions on the label. This helps reduce the possibility of residue.
3. Don't use too much cleaner.
Using too much cleaner can cause a sticky residue. Follow the dosage instructions on the packaging and avoid excess.
4. Use a non-cross lint mop.
Choose a mop that does not cross fibers or has very fine fibers. This mop can help reduce the chance of residue remaining on the floor.
5. Scrub the floor gently.
When you wipe the floor, avoid scrubbing too hard. This can spread the cleaner more evenly and reduce the chance of sticky residue.
6. Rinse with clean water.
After cleaning the floor with the cleaner, rinse the mop with clean water to remove any remaining cleaning residue.
By following the tips above, you can clean the floor more effectively without leaving a sticky residue.