Brilio.net - Gas stoves are kitchen equipment that many people own. Apart from being practical to use, gas stove fuel is also fairly easy to find.
Because it is frequently used, gas stoves are at risk of getting dirty. Therefore, make sure you immediately clean the gas stove after every use. Otherwise, the remaining food will burn and crust over all parts of the gas stove. The appearance also looks dirty.
If this is the case, some people will deliberately rub all parts of the stove using a citrus solution. After scrubbing thoroughly, then rinse thoroughly using running water. Even though it is maximally clean, not everyone is suitable for being exposed to citrus solutions. There are those who claim that their skin feels itchy and sore when exposed to citrus solution.
As a solution, you can clean all parts of the gas stove with other cleaning agents. As pointed out by TikTok user @esge_electronics. In his video upload, he is seen concocting a special cleaning solution made from a mixture of three kitchen ingredients.
How to clean burnt crust on the stove.
Reported by BrilioFood from TikTok @esge_electronics on Monday (27/5), the three kitchen ingredients used were 1 tablespoon of baking soda, 100 ml of vinegar, and 1 tablespoon of dishwashing soap. Add and mix the three kitchen ingredients in a bowl.
photo: TikTok/@esge_electronics
If so, grease and scrub all parts of the gas stove using the cleaning solution that has been made. In the video upload, this netizen is rubbing the body and burner of the gas stove. Don't forget, also rub the back of the stove knob, OK?
photo: TikTok/@esge_electronics
For the stove part, scrub it with the same cleaning solution. To ensure maximum cleanliness, this netizen appears to be scrubbing the stove burner using a wire sponge. After that, immediately rinse the stove burner under running water.
photo: TikTok/@esge_electronics
Meanwhile, just wipe the body of the gas stove with a clean cloth. As a result, the gas stove body looks shiny like new again. The next step, install the stove burner in its original position.
photo: TikTok/@esge_electronics
Why doesn't the gas stove turn on even though the gas cylinder is full?
There are several reasons why a gas stove may not turn on even though the gas cylinder is full:
1. Source of fire.
Make sure that the ignition source, such as a match or gas lighter, is working properly. If not, try using a different fire source.
2. Gas line is blocked.
Sometimes, the gas channel in the stove can be blocked by dirt or scale. This can prevent adequate gas flow to create a flame. Try cleaning the gas line carefully using a small brush or low pressure air.
3. Pilot light goes out.
If the stove has a pilot light (initial ignition flame), make sure it is lit. If it goes out, you need to turn it back on according to the instructions in the user manual.
4. Gas regulator is damaged.
The gas regulator in the cylinder or on the stove can be damaged or leak. This can inhibit the flow of gas enough to create a flame. If you suspect the regulator is damaged, you should contact a certified gas technician for further inspection.
5. The gas valve does not open completely.
Make sure that the gas valves on the cylinder and stove are fully open. Sometimes, they may only be partially open, which reduces gas flow.
If you're not sure what's causing the problem, it's best to call a certified gas technician to check and resolve the problem safely. Do not try to fix problems involving gas if you are not trained, as it can be dangerous.