Brilio.net - One of the problems that often arises in motorbikes is crack spots on the speedometer. Apart from making the appearance look dirty, this also interferes with using the motorbike. The reason is that the information about the speed and fuel in the motorbike is not visible.
After investigating, the cracks on the speedometer are caused by dust, oil or other dirt that sticks to it. Not only that, exposure to sunlight can also cause fine cracks, making them more difficult to remove.
Knowing this, a number of people immediately rubbed the speedometer glass using used oil. After rubbing it for a while, the surface of the speedometer glass was clean and shiny again.
But don't just use used oil, it turns out there are other materials that can be used to remove cracked stains on the speedometer glass. The method was demonstrated by TikTok user @arman_tm. In the video upload, this netizen replaces used oil with two other cleaning agents. Curious about how?
How to remove cracked stains on a motorbike speedometer glass using natural ingredients.
At the beginning of the video, he shows the appearance of his motorbike's speedometer. It appears that the surface is covered in cracked spots so that the inside of the speedometer is completely invisible.
photo: TikTok/@arman_tm
Instead of rubbing it with used oil, this netizen actually made a cleaning solution. First, pour one sachet of shampoo into a small bowl. If so, add one kitchen ingredient, namely cooking oil, as a mixture. Stir until these two ingredients are completely mixed.
photo: TikTok/@arman_tm
After that, apply the cleaning solution to the surface of the motorbike speedometer. Spread it evenly while rubbing it gently using an old toothbrush. When it's flat, let it sit for a few moments.
"Let it sit until the cleaning solution is dry," he said, quoted by BrilioFood from TikTok @arman_tm on Tuesday (30/4).
photo: TikTok/@arman_tm
After drying, wipe the speedometer glass with a wet cloth. As a result, the speedometer glass is clean and shiny again. There are no cracks left on the speedometer glass. That way, motorbike riders can see the contents of the speedometer without being distracted.
photo: TikTok/@arman_tm
Easy way to increase cooking oil.
Recycling cooking oil, especially cooking oil that has been used, is a process that requires caution so that it remains safe and healthy for reuse. The following are ways you can increase cooking oil:
1. Filter the oil.
After using it for frying, let the oil cool for a moment, then strain the oil using a cloth filter or coffee filter to remove food debris and crust that forms during the frying process. This filtering process helps remove particles that can accelerate oil deterioration.
2. Store oil properly.
After filtering, store the oil in a clean, dry airtight container. Make sure the container is tightly closed to prevent air and moisture from entering which can accelerate oil oxidation.
3. Add fresh oil.
If necessary, add fresh cooking oil to the oil that has been used to replenish the volume lost due to evaporation or absorption by previously fried foods. Add the right amount of fresh oil to maintain the quality and stability of the oil.
4. Pay attention to storage temperature.
Store cooking oil at a stable room temperature and away from direct sunlight. High temperatures and exposure to sunlight can accelerate oxidation and damage to oil.
5. Check the oil quality.
Before reusing, check the quality of the oil by looking at the color, aroma and taste of the oil. If the oil smells rancid, is dark in color, or has an unpleasant taste, it is best not to reuse it.
By following the steps above, you can increase cooking oil in a safe way and maintain its quality so that it can still be used for frying well. However, it is important to remember that increasing cooking oil should only be done within reasonable limits and should not be excessive.