Brilio.net - Fans are usually used to provide a refreshing effect indoors when the weather is hot. In fact, it's not uncommon for some people to deliberately turn on fans all day long, you know. This is what makes the fan dirty quickly.
The fan blades are usually filled with dust. This is what makes the appearance of the fan look dirty. Not only that, the air produced by the fan also becomes dirty and not optimal.
To clean it, a number of people immediately dismantled all parts of the fan. The goal is so that the fan can be cleaned optimally. Unfortunately, this process takes a long time. Even though there are more practical ways to clean dust on fans. No kidding, the time needed is only 5 minutes, you know. Curious about how?
How to clean fan dust without disassembling it.
This trick was shared by netizens via the PROFESSOR CANDIDATE YouTube account. In his video upload, this netizen appears to rely on just one kitchen ingredient as a cleaning agent. Reported by BrilioFood from YouTube PROFESSOR CANDIDATE on Saturday (11/5), one kitchen ingredient used is dishwashing soap.
To do this, first put water in a spray bottle. If so, then add enough dishwashing soap as a mixture of cleaning ingredients.
"When it's done, we close it and shake it until it's mixed," explained the account owner.
photo: YouTube/PROFESSOR CANDIDATE
To apply, first set aside the dust stuck to the front of the fan using a brush. Once done, spray the cleaning solution you made earlier on all parts of the fan.
Try not to get any parts of the engine. "But the jam must be evenly wet," explained the PROFESSOR CANDIDATE account.
photo: YouTube/PROFESSOR CANDIDATE
After that, wrap the fan in a large plastic bag. Don't forget to tie the back so the crackle doesn't open when the fan is turned on later. Then turn on the fan at highest speed for 3-5 minutes.
photo: YouTube/PROFESSOR CANDIDATE
Turn off the fan when it has been on for 5 minutes. Slowly open the plastic bag that wraps around the fan. As a result, the fan is clean again in just 5 minutes. Because all the piles of dust and dirt had fallen and were collected in the plastic packaging. Practical, right?
photo: YouTube/PROFESSOR CANDIDATE
How do you use dish soap to clean gallons of moss?
Cleaning a moss-covered gallon with dishwashing soap is an effective way to remove moss and dirt. Here are the steps:
1. Fill the gallon with warm water.
Pour warm water into the gallon until it is about half full. Warm water helps soften moss and dirt that sticks to the surface of the gallon.
2. Add dishwashing soap.
Pour a few drops of dishwashing soap into a gallon filled with warm water. Make sure to use dishwashing soap that is effective in removing stuck-on grease and dirt.
3. Shake the gallon.
Close the lid and shake it gently for a few minutes. This process helps the soap reach all parts of the gallon and removes moss and stuck-on dirt.
4. Rinse the gallon.
After washing with dishwashing soap, rinse the gallon with clean water to remove soap residue and raised dirt.
5. Drain the gallon.
After washing and rinsing, let the gallon dry by itself. Make sure to dry the inside and outside of the gallon well before using it again.
By following these steps, you can clean a moldy gallon effectively using dishwashing soap.