Brilio.net - When the weather feels very hot, turning on a fan can definitely be one of the best solutions. This tool can make the body feel cool without wasting electricity. However, there are times when the cold air from the fan is still not effective enough to relieve the heat.
As a result, many people rely on air conditioning to cool the air. The AC can work actively to make the entire room feel cooler quickly. However, not everyone has AC at home. Not to mention, the electrical power needed to move this tool can be said to be relatively large.
If you are one of those who often get hot but don't have an AC, don't worry, because there is a smart solution to change the fan to make it as cool as the AC, you know. The trick was shared by netizens on the HEDI PONSEL YouTube account. After all, this trick won't make you break the bank, you know.
How to change the fan to make it as cold as the AC.
What you have to prepare is only one type of kitchen waste, namely used plastic bottles. You can use 2 used plastic bottles with small holes cut into the bottom edges. The holes in this bottle function as ventilation to let out cold air.
photo: YouTube/HEDI MOBILE PHONE
After giving it small holes, just cut the bottom of the bottle to put a few ice cubes in it. Yup, these ice cubes are the key so that the fan can be as cold as the AC later.
If you have given ice cubes, the bottle can be attached or hung upside down on the back of the fan. When the bottle is installed properly, then turn on the fan.
"(It can be cold because) the way the fan works is that it takes air from the back," emphasized the owner of the HEDI PONSEL YouTube account, quoted by BrilioFood on Thursday (2/5).
photo: YouTube/HEDI MOBILE PHONE
So, are you interested in trying the trick of turning a fan cold like this or do you have any other tricks? Taking a peek at HEDI PHONE's YouTube upload, apart from having been watched 318 thousand times, quite a few netizens have given enthusiastic comments about this trick, you know.
How to clean a fan without disassembling it.
Cleaning the fan without disassembling it can be done with a few simple steps.
1. Turn off the fan.
Make sure the fan is turned off before you start cleaning. This is an important security step.
2. Use a brush or soft brush.
Use a brush or brush with soft bristles to clean the outside of the fan and fan blades. Rub gently to remove stuck dust and dirt.
3. Use a vacuum.
If you have access to a vacuum with a vacuum attachment, use it to clean the fan blades and fan vents. Make sure to use a gentle vacuum cleaner to avoid damaging the fan parts.
4. Wipe with a soft cloth.
After cleaning with a brush or vacuum, wipe the outside of the fan with a soft, clean cloth. This helps remove any remaining dust and provides additional shine.
5. Pay attention to security.
Make sure not to let water get into the fan or its electrical parts. Do not use excessive cleaning fluid which could damage the fan or cause an electrical hazard.
By following the steps above, you can clean the fan effectively without having to disassemble it.